Geotechnical Drilling in Sydney

Engineer-led geotechnical drilling across Sydney

Slaitini Geotechnical and Drilling Services provides geotechnical drilling for site investigations across Sydney, Wollongong and Newcastle. We work for builders, developers, architects and engineering consultants, and we deliver clear borehole logs your engineer can design from.

Because we’re both a drilling contractor and a geotechnical engineering practice, you can book the drilling on its own or have us handle the whole investigation, from fieldwork through to the signed report.

Our drilling services

  • Auger drilling – solid flight augers to 30 m and hollow flight augers to 15 m for soil profiling, sampling and groundwater checks.
  • Standard Penetration Testing (SPT) – automatic hammer SPT at set depths to measure soil strength and density for foundation design.
  • Undisturbed sampling – U50 and U75 tube samples for laboratory testing.
  • Rock coring – NMLC, HMLC and HQ coring to 90 m for footings, basements and piling. See our Rock Coring page →
  • Washbore drilling – rotary mud drilling to 90 m, plus air hammer drilling for hard ground.
  • Tight access drilling – our tracked rig is just 955 mm wide, so it fits through most side gates and narrow passages.

Our rig

We run a Christie Engineering multipurpose tracked drilling rig with a two-speed planetary rotary head, automatic SPT hammer and a dump mast for angled drilling and coring.

Solid flight augersTo 30 m
Hollow flight augersTo 15 m
SPTAutomatic hydraulic hammer
U50 & U75 samplingYes
Washbore (rotary mud)To 90 m
NMLC / HMLC / HQ coringTo 90 m
Air hammerYes
Concrete coringUp to 400 mm
Rig width / weight955 mm / 2,100 kg

What you receive

  • Borehole logs describing soil and rock conditions
  • Samples for laboratory testing (lab testing is quoted separately)
  • If you need it, a geotechnical report or AS 2870 site classification signed by a qualified geotechnical engineer

When you need a geotechnical investigation

  • New homes, granny flats, extensions and duplexes (site classification for footing design)
  • Basements, excavations and retaining walls
  • Multi-unit, commercial and civil projects
  • When council, a certifier or your structural engineer asks for one

Why work with us

  • Engineer-led. The person planning your investigation is a geotechnical engineer, not just a driller.
  • One point of contact. Drilling and reporting under one roof, so there’s no chasing between subcontractors.
  • Fast turnaround. Site classification reports are typically ready 1–2 business days after fieldwork.
  • Rated 5 stars on Google by builders and homeowners across Sydney.

Frequently asked questions

01. Do I need a geotechnical report to build?
Most new residential builds need a site classification under AS 2870 so your engineer can design the footings. Larger projects, basements and sloping sites usually need a full geotechnical investigation. Your certifier or structural engineer will confirm what’s required.
02. How much does it cost?
Standard residential site classifications start from $700 + GST. Larger investigations are quoted per job, depending on the number and depth of boreholes and any lab testing.
03. Can you get into a tight backyard?
Yes. Our tracked rig is 955 mm wide and built for limited-access sites. Send us photos or the access width and we’ll confirm.
04. Can you drill for my engineer's investigation?
Yes. We regularly drill for consulting engineers and supply logs and samples to their specification.

Need a geotechnical investigation? Call 0406 355 412 or send us your site address and plans for a quote.

Our Services

Have a
project in
mind?